Drake Landing Solar Community
Home / Solar panels / Mono or poly solar panels: which suits a Canadian roof?

Mono or poly solar panels: which suits a Canadian roof?

Monocrystalline solar panels are cut from a single silicon crystal, so they are more efficient, black in colour and usually cost more per watt. Polycrystalline solar panels are made from many melted silicon fragments, so they are blue and speckled, a little lower in efficiency and cheaper, which also means you need more roof space for the same output. Today most new residential solar panels are monocrystalline.

Last updated

What is the difference between monocrystalline and polycrystalline solar panels?

The main difference starts with how the silicon is made, and it explains most of what separates the two types of solar panels. For monocrystalline solar cells, manufacturers grow a single crystal of silicon, shape it into a cylinder, and slice it into thin wafers. Every wafer is one continuous crystal, which lets electrons move with low resistance. The manufacturing process for polycrystalline solar cells is simpler. Silicon crystals melted together in a mould, cooled into a block and cut into wafers made of many small crystals. The boundaries between those grains slow the electrons slightly, and they give the cells their blue color and mottled look.

Cutting a round ingot into square wafers wastes some silicon, which is one reason monocrystalline production has been more expensive. Casting a block wastes little. Over the years, better methods have narrowed that gap.

Both types are silicon solar cells, wired in series, sealed under glass and framed in aluminum. Both turn sunlight into direct current through the photovoltaic effect, and both connect to the same inverter. The guide to how solar panels work walks through that process, and the monocrystalline solar panels guide looks at the single-crystal technology in more detail.

Which solar panel is more efficient?

Panel efficiency is the share of sunlight that becomes electricity. Monocrystalline panels are typically rated around 20 to 23 percent or higher, and polycrystalline panels roughly 15 to 18 percent, though exact figures depend on the model and the year. Higher efficiency means more power per square metre, so you need fewer panels, and a monocrystalline array can fit more watts in the same space, or the same watts in less of it.

Here is a rough example with stated assumptions. Suppose a roof has space for about 30 square metres of panels. At about 21 percent, that area would give roughly 6 kW under test conditions, while at about 17 percent it would give around 5 kW. To reach 6 kW, the lower-efficiency panels would need about 35 square metres. This is an illustration of the difference, not a quote, and the solar panel efficiency guide explains how rated figures are measured. On a large, unshaded roof the lower efficiency may not matter, as long as the money saved is real. On a small roof, efficiency decides how much you can install, and the roof requirements checklist shows what installers look at.

How do cost and price compare?

Polycrystalline panels have typically been cheaper to make, so their price per watt has usually been lower, and they produce a bit fewer kilowatt-hours for the area. The gap has narrowed a lot, and in many markets they have become harder to find because manufacturers have shifted production to monocrystalline products. Quotes vary by region, year and supplier, and a written quote is the only reliable guide.

Compare the installed amount for each watt, not the amount for each panel, because a panel with higher efficiency delivers more watts in the same frame. The price per watt explained guide and the broader solar panel cost in Canada piece show the main cost drivers. Panel technology is only one of them, so polycrystalline and monocrystalline solar systems can land at a similar total, next to the inverter, racking, labour, permits and roof complexity.

Do monocrystalline or polycrystalline panels work better in cold weather?

Both types work well in a Canadian winter, and the difference there is small. Silicon cells run more efficiently when they are cold, so a clear, cold day can be very productive. Panels lose a little output as they heat up, which the data sheet describes as the temperature coefficient. Monocrystalline panels often have a slightly better coefficient, so they hold up a bit better in summer heat, but the difference is small. Low light and cloudy days reduce production for both.

What matters in winter is short days, the low sun and snow on the glass, not the crystal structure. The solar panels in winter guide covers these limits. When comparing data sheets, look at the temperature coefficient, the snow load rating and the guarantee terms, and read solar panel warranty explained to understand what the terms mean.

Does the extra cost of mono panels pay off?

It depends on what the extra efficiency buys. Take a simple, stated assumption: a 6 kW system, and a gap of 10 cents for each watt between the two types. That would add about 600 dollars to the monocrystalline quote. If space is tight and the higher output lets you install the full system you want, the extra spending buys real solar energy. If there is room for either kind, the cheaper panels may produce enough energy for less money. The numbers are placeholders, so replace them with the figures from your own quotes.

Two other points change the answer. First, a bigger array needs more racking, more wiring and more labour, so the total does not fall in line with the panel expense. Second, your electricity rate, the way the utility credits exported power and any programme you qualify for decide how much a kilowatt-hour is worth to you. The solar panel payback period guide explains how those pieces fit together, and no calculation here promises savings.

Are there other solar panel types besides mono and poly?

Yes, several other types exist. Thin-film modules use a very thin layer of semiconductor instead of silicon wafers. They are lighter and flexible in some forms, but their efficiency is lower, so they are mainly used for large ground projects, portable gear and special surfaces. Some silicon cells also use extra layers or rear contacts to improve performance, and those are still silicon panels, sold under the monocrystalline label. Bifacial modules collect light on both faces, and the bifacial solar panels guide covers how they perform with snow cover.

For an ordinary house, the practical choice is between a few silicon models, and the data sheet matters more than the label. Compare the rated power, efficiency, temperature coefficient, dimensions and warranty, then check the production estimate the installer provides, using how to read a solar production estimate as a guide.

What about appearance and lifespan?

Monocrystalline panels usually have black cells that produce an even, uniform look, often with a black frame and back sheet, which many owners find tidier on a roof. Polycrystalline panels look blue, with a visible grain, and typically have a silver or aluminum frame. Appearance is a matter of taste, and it does not affect output.

Both last decades, and a well-built panel system keeps its performance for most of that time. Output declines slowly each year, and many warranties run about 25 years, though terms differ. The solar panel lifespan and degradation guide explains how to read those numbers.

Which one is the right choice for a given house? This site does not sell or install anything, so treat these as questions for a licensed installer, asked in neutral terms:

  • which panel model the design uses, and its rated efficiency
  • the installed cost of each watt, and what is included
  • the temperature coefficient and the snow load rating
  • the product warranty and the performance warranty, and who honours them

Quick answers

Is monocrystalline better than polycrystalline?

On efficiency and appearance, yes. Monocrystalline panels typically give more power per square metre and have a uniform black look. Polycrystalline panels have usually been cheaper, so the better choice depends on available space and the quotes you receive.

Are polycrystalline solar panels still sold?

They are still made, but they have become less common for homes, because monocrystalline modules got cheaper and most manufacturers now focus on monocrystalline products. Availability depends on the supplier.

Which solar panel works best in cold weather?

Both do well, and cold temperatures slightly raise cell efficiency. Monocrystalline panels often have a slightly better temperature coefficient, but snow, short days and shading matter more than the crystal structure.

How can you tell the two apart?

Look at the colour. Monocrystalline cells are uniformly black and often have rounded corners, while polycrystalline cells are blue with a grainy, speckled texture.

Where to verify

Programmes, rules and prices change. Before acting on anything you read here, check it at the source:

  • Natural Resources Canada: federal energy-efficiency and clean-energy pages: programme status, EnerGuide labels, technical background.
  • Your provincial electrical or building safety authority: permit, inspection and code requirements, including the edition of the Canadian Electrical Code in force.
  • Product certification marks: look for a recognised Canadian certification mark (for example CSA) on electrical and gas equipment.
  • Your electricity or gas utility: rates, connection requirements and any utility incentive.
  • A licensed professional in your province: sizing, safety and installation for your particular building; these guides are general background only.

dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.

Part of the topic: Solar panels. See all guides on this topic.

More guides on this topic