Drake Landing Solar Community
Home / Solar panels / Bifacial solar panels: how much does the back side add?

Bifacial solar panels: how much does the back side add?

Bifacial solar panels are modules whose cells collect sunlight on both faces. The front side works like any other solar panel, while the rear side picks up light reflected from the surface below, such as grass, gravel or a snowfield, and that adds some energy to the front-side output. How much depends mostly on what lies under the array and how high the modules are mounted.

Last updated

What are bifacial solar panels and how do they work?

Bifacial modules are also called double-sided solar panels. A standard module has an opaque back sheet. A bifacial solar module replaces it with clear glass or a transparent layer, and its solar cells are built so that light striking the underside also frees electrons. The photovoltaic effect is the same on both faces. Direct sunlight hits the front, while the rear receives diffuse light from the sky plus reflected light from the surface beneath.

Most bifacial modules are glass-glass panels, with a sheet of glass on each side of the cells. The mounting system, junction box and wiring are placed to shade as little of the rear side as possible. The module is also a source of power on the other side of the glass. Ordinary monofacial panels have a solid back and ignore anything behind them. Both kinds feed the same inverter, produce the same direct current and use the same PV technology, so a bifacial array connects to the house like any other system.

How much extra energy does the rear side give, and what is albedo?

Albedo is the share of incoming light that a surface reflects, and a high albedo surface helps the rear side most. Dark asphalt or green grass reflects roughly a tenth to a quarter of the light, while bright gravel, white membrane roofing and fresh snow reflect much more. Fresh snow can send back well over half of the light that hits it, which is why snow reflection matters so much in Canada.

Rear side gain is the added output compared with a similar monofacial module. Published field studies and manufacturer material show a wide spread: a few percent over dark soil or grass, and in good conditions over bright surfaces or snow, ten percent or more of additional energy generation. Treat any single number with caution. The result depends on:

  • the albedo of the surface under and behind the modules
  • mounting height, since more clearance lets more light reach the underside
  • tilt angle and row spacing, because tight rows shade the soil behind them
  • how much of the reverse face is blocked by rails, racking and the junction box
  • the share of diffuse light, which is larger on cloudy days

A common mistake is to credit a big uplift to a system lying flat on dark shingles. Panels mounted a few centimetres off a pitched roof leave little room for reflected light to reach the underside, so the benefit there tends to be small.

Do bifacial panels perform well with snow and in winter?

They can. In a snowy winter the surroundings stay bright for months, and low winter sun bounces off the white surface toward the underside of a raised array. Cold also helps all modules a little, because silicon cells run more efficiently at lower temperatures. The guide to solar panels in winter in Canada covers short days and snow load in more detail.

There is a catch. Snow that piles against a low array can bury the lower edge, and a drift can block the rear face entirely. A frame with generous clearance lets the underside see sky and snow instead of a drift. A steeper tilt also sheds snow faster, a point explored in the solar panel snow removal guide. Over a year the contribution from the rear side is real but modest next to the front face, and it is largest where snow cover is long and stable and the terrain is open.

Some designs stand modules vertically facing east and west, so both faces collect sunshine at the start and end of the day and snow slides off easily. That is a specialised layout used on farms and some commercial sites, not a typical house system.

Is a ground mount better for bifacial solar panels?

Usually yes. Putting the array on the ground gives the installer control over height, tilt and spacing, so the rear receives more reflected sunshine. Rows can sit farther apart, the soil below can be covered with pale gravel or kept clear, and the lowest edge can sit above the typical snow depth, and the flat or sloped surface below stays clear. The ground mount solar panels guide explains foundations in frost and how costs differ from a roof.

Flat commercial buildings with white membrane can also suit bifacial modules on raised racks. On a pitched house the benefit is usually small. Direction matters as well, because the best solar panel direction in Canada affects the front just as much as the rear.

A few practical checks help when comparing bifacial and monofacial quotes:

  • ask the installer which uplift they assumed, and why, for your actual surface
  • check the module warranty terms for both faces and for the glass
  • confirm that the inverter accepts the higher current a bifacial array can produce on bright days
  • compare the price per watt of both types, since bifacial modules often cost a little more
  • ask how the production estimate treats snow cover and drifts

The solar panel efficiency guide explains how a rated efficiency figure is measured. Bifacial modules are usually rated on the front only, so the extra from the rear side does not appear on the data sheet.

What are the downsides of bifacial solar panels?

Bifacial modules typically cost somewhat more than comparable monofacial ones, and the added energy has to cover that difference in power cost. The uplift is hard to predict, so sizing and production estimates carry more uncertainty. Glass-glass panels are heavier, which matters for the load on the structure and for handling during installation. A module shaded behind, whether by racking or by a drift, loses part of its benefit.

The extra output cannot be judged by looking at the array. A production estimate built on a bifacial model deserves a careful read, and how to read a solar production estimate shows which assumptions to look for. For comparison, the collectors at Drake Landing were flat-plate thermal collectors on garage roofs that heated fluid rather than made electricity, and they faced one way only, as described on the solar collection page.

Quick answers

Do bifacial solar panels work better in snow?

Often, because fresh snow reflects a lot of sunlight onto the underside. The result depends on mounting height, tilt and whether drifts block the lower edge, so it varies from site to site.

How much more energy do bifacial panels produce?

Extra output ranges from a few percent over dark soil to ten percent or more over bright surfaces or snow, under good conditions. A system mounted close to the shingles usually adds less.

Are bifacial panels worth it for a house?

On a typical house the added yield is often small, so the extra cost may not pay off. A ground mount or raised rack over a pale surface gives the rear more to use.

Do bifacial panels need a special inverter?

They connect to a normal inverter, but it must be sized for the higher current that the rear can add on bright days. The installer or the data sheet can confirm the limits.

Where to verify

Programmes, rules and prices change. Before acting on anything you read here, check it at the source:

  • Natural Resources Canada: federal energy-efficiency and clean-energy pages: programme status, EnerGuide labels, technical background.
  • Your provincial electrical or building safety authority: permit, inspection and code requirements, including the edition of the Canadian Electrical Code in force.
  • Product certification marks: look for a recognised Canadian certification mark (for example CSA) on electrical and gas equipment.
  • Your electricity or gas utility: rates, connection requirements and any utility incentive.
  • A licensed professional in your province: sizing, safety and installation for your particular building; these guides are general background only.

dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.

Part of the topic: Solar panels. See all guides on this topic.

More guides on this topic