Drake Landing Solar Community
Home / Solar panels / How solar panels turn sunlight into electricity

How solar panels turn sunlight into electricity

Solar panels operate through the photovoltaic effect: light striking silicon cells knocks electrons loose, an electric field inside each cell pushes them in one direction, and that flow is direct current (DC). An inverter then converts the DC electricity into alternating current, the kind your home and the grid use.

Last updated

What is the photovoltaic effect inside a solar cell?

A solar panel is a flat frame holding dozens of solar cells, usually made from silicon. Each cell is a thin wafer built from two layers. The first layer has a slight surplus of electrons (n-type), the other a slight shortage (p-type). Where they meet, a built-in barrier forms, called the p-n junction.

When a photon of sunlight with enough energy hits the silicon, it transfers its energy to a bound electron and knocks it loose, leaving a gap, or hole, behind. The junction's field sweeps the free electrons toward one side and the holes toward the other. Metal contacts on the front and back of the cell collect these charges, and when a circuit connects them, the electrons travel through it as an electrical flow. This is the photovoltaic effect, first observed in the nineteenth century, and the first practical silicon solar cell appeared in the 1950s.

A single cell makes well under a single volt, which is too little to be useful. So a panel wires many cells in series, and the panels in an array are linked in strings to reach the voltage the inverter needs. A glass front, a sealed back layer and an aluminum frame protect the cells for decades of weather.

How does a solar panel system make power you can use?

Four steps carry the energy from the roof to your outlets:

  1. Sunlight strikes the cells, which generate DC electricity.
  2. The inverter converts that direct current into alternating current (AC) at the voltage and frequency of your service.
  3. Your home loads draw what they need, and the rest flows to the grid or into a battery.
  4. A meter records what you import and export, so the utility can credit the surplus.

Besides converting, the inverter keeps the output in step with the grid and switches off if the grid goes dark, a safety rule for line workers. That is why most systems that connect to the grid stop during a blackout unless they have special backup equipment, a point covered in the guide to grid-tie inverters. Layouts from a single string inverter to small units behind each panel are compared in solar inverter types explained.

When the array produces more than the house uses, a grid-tied system exports the surplus, and the utility credits it under whatever rules apply in your province. Those rules differ, so net metering explained for Canada shows how to check yours. If you add storage, the surplus can charge a battery first, as described in how a solar battery works.

How much electricity does one solar panel produce?

A modern residential solar power panel is rated at roughly 350 to 450 watts under standard test conditions, which means bright, cool, straight-on conditions in a lab. Real output is lower most of the time, because solar energy arrives at a changing angle and strength. Here is a rough example with stated assumptions, not a forecast: take a 400 W panel, an average of about 3.5 peak sun hours a day over the year, and about 20 percent losses in wiring, the inverter, dirt and heat.

400 W x 3.5 hours x 0.8 = about 1.1 kWh a day, or roughly 400 kWh a year per panel. A house using several thousand kilowatt-hours a year therefore needs many panels. The guide on how many solar panels it takes to power a house walks through the sizing, and what is a kilowatt-hour explains the unit. Sun hours vary a lot between Canadian cities, which the peak sun hours guide lays out.

Panel efficiency is the share of sunlight a panel turns into electricity. Typical residential panels fall roughly between 17 and 23 percent, and the solar panel efficiency guide explains why a higher rating mainly means more watts from a smaller area.

Do solar panels still make power in cloudy weather, at night or in a Canadian winter?

Panels respond to light, not heat. On cloudy days they still collect diffuse sunlight, only less of it, so production falls but does not stop. At night they produce nothing, and the home draws from the grid or a battery.

Cold actually helps the electronics. Silicon cells lose a little voltage as they warm up, so a bright, cold, clear day can generate more than a hot summer afternoon at the same brightness. Every stage of the process responds to temperature in this way. The limits in winter are the short days, the low angle of the sun and snow covering the glass. The guide to solar panels in winter in Canada covers all three, and the solar panel snow removal guide explains why tilted panels shed snow once it warms up.

Is a solar panel the same thing as solar heating?

No, and the mix-up is common. Solar PV panels generate electricity from light and use solar energy directly. Solar thermal collectors absorb sunlight as heat and move it into water or glycol, and they need no inverter. The two technologies share the sun but little else, and solar thermal versus solar PV compares them. The pages on how solar water heaters work describe the thermal side.

Drake Landing in Okotoks used thermal collectors, not PV: 800 flat-plate collectors on garage roofs gathered summer heat and sent it underground for winter, as the solar collection page explains. The sunlight is the same, but the product is heat.

How long do solar panels last, and what wears out first?

The cells have no moving parts, so panels usually keep producing for decades while their output fades slowly, often by a fraction of a percent a year, and many warranties run about 25 years. The inverter is the part more likely to need replacing sooner, and the solar panel lifespan and degradation guide explains what the numbers mean and how to read a warranty.

What should you check before buying a system?

This site does not sell or install anything, so treat these as questions to put to a licensed installer, the local utility and the provincial energy ministry:

  • how much shade falls on the roof across the day and the seasons
  • which inverter type the design uses and what warranty covers it
  • how the utility credits exported electricity, and what interconnection steps apply
  • what permits and electrical inspections the province or municipality require
  • which rebates, tax measures or loans exist right now, and how to confirm the current terms

Quick answers

What happens inside a solar panel, step by step?

Sunlight frees electrons in silicon cells, the junction pushes them into a flow, and the panel delivers DC electricity. The inverter turns it into AC for the home, and any surplus goes to the grid or a battery.

Can solar panels make power without direct sunlight?

Yes, but at lower output. Panels collect diffuse daylight on cloudy days, and the amount depends on cloud thickness. They produce nothing at night.

Do solar panels need an inverter?

For a normal home, yes, because panels make DC and household circuits run on AC. It can be a central unit or a small unit behind each panel.

Why does a solar system shut off in a power outage?

Grid-tied inverters shut down when the grid goes down, to protect line workers. A system with backup equipment and a battery can keep selected circuits running.

Where to verify

Programmes, rules and prices change. Before acting on anything you read here, check it at the source:

  • Natural Resources Canada: federal energy-efficiency and clean-energy pages: programme status, EnerGuide labels, technical background.
  • Your provincial electrical or building safety authority: permit, inspection and code requirements, including the edition of the Canadian Electrical Code in force.
  • Product certification marks: look for a recognised Canadian certification mark (for example CSA) on electrical and gas equipment.
  • Your electricity or gas utility: rates, connection requirements and any utility incentive.
  • A licensed professional in your province: sizing, safety and installation for your particular building; these guides are general background only.

dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.

Part of the topic: Solar panels. See all guides on this topic.

More guides on this topic