Drake Landing Solar Community
Home / Guides / Heat pumps in Canadian winters

Heat pumps in Canadian winters

A heat pump moves heat instead of making it, which is why it can deliver more heat than the electricity it uses. Whether that holds at minus 25 depends on the design, so these guides focus on cold-climate behaviour.

Last updated

About this topic

A heat pump moves heat instead of making it, which is why it can deliver more heat than the electricity it uses. Whether that holds at minus 25 depends on the design, so these guides focus on cold-climate behaviour.

Topics include efficiency terms such as COP and HSPF, sizing by tonnage, ducted versus ductless layouts, defrost cycles, noise and maintenance. The pages are general explainers and do not replace a load calculation by a qualified contractor.

All 49 guides on this topic

  • Air-to-air heat pumps: what they do and don’t do: An air to air heat pump takes heat from outdoor air and releases it as warm air inside the house, either through ducts or through wall and ceiling units. It also cools in summer, but it does not heat water for radiators, in-floor loops or taps, which is the job of an air-to-water system.
  • Backup heat for a heat pump: electric, gas or none: A heat pump needs backup heat when, on the coldest days, it cannot deliver the whole heat loss of the house on its own. Whether you need it depends on the model, the size of the house and the design temperature of your area, and a cold-climate unit sized well can sometimes manage without it.
  • Best thermostat settings for a heat pump in winter: The best heat pump thermostat setting is a steady temperature with small, slow changes. Deep overnight setbacks can trigger the expensive electric backup heat when the system tries to recover, which cancels the savings.
  • Can a heat pump replace your air conditioner?: Yes. A heat pump is an air conditioner that can also run in reverse, so in summer it cools and dehumidifies the house the same way, and in winter it heats. For many Canadian homes one heat pump air conditioner can replace a central air conditioner and part or all of a gas furnace in one HVAC system.
  • Choosing the best location for a heat pump outdoor unit: The best spot for a heat pump outdoor unit is one with free airflow, protection from drifting snow and roof runoff, a short run to the indoor unit and enough distance from bedrooms and neighbours. The installation manual and local codes set the exact clearances.
  • Cleaning a heat pump: filters, coils and drain: Owners can safely clean a heat pump’s washable air filters, the exterior of the indoor unit, the area around the outdoor unit and loose debris on the outdoor coil. Deep coil cleaning, refrigerant work and electrical repairs belong to a licensed technician.
  • Comparing heat pump and furnace running costs: A heat pump costs less to run than a gas furnace only when its efficiency advantage outweighs the price gap between electricity and gas, which depends on your province and rates. The honest way to decide is to run the numbers with your own utility bills.
  • Comparing heat pump companies before you hire one: When you compare heat pump companies, separate the manufacturers who make the equipment from the installers who size, fit and service it. The installer decides how well a system performs in your house, so compare them on heat pump experience, sizing method, warranty, service and paperwork.
  • Do you need a permit to install a heat pump?: In most of Canada a heat pump installation needs at least an electrical permit, and some municipalities also ask for a building or mechanical permit. Rules differ by province and by city, so the reliable answer comes from your local building department or the contractor who pulls the permit.
  • Finding current heat pump rebates and loans: Heat pump rebates in Canada come from three layers, the federal government, the province and the local utility, and the terms change often enough that any amount quoted online may be out of date. The reliable way to find current offers is to check each layer's official energy-efficiency page before you sign a contract.
  • Fitting a Heat Pump to an Older Canadian Home: Older homes can take heat pumps, but the install usually hinges on four things: how much heat the house loses, the condition of the ducts or radiators, the capacity of the electrical panel and whether there is a practical place for the outdoor unit. Checking each before quotes arrive avoids surprises.
  • Heat pump COP: how efficiency is measured: COP, the coefficient of performance, is the heat a heat pump delivers divided by the electrical energy it uses at a given moment. A COP of 3 means each kilowatt-hour of electricity brings about 3 kilowatt-hours of heat into the house, because most of the heat is moved from outdoors or the ground rather than made.
  • Heat Pump Load Calculations: Why Your Quote Needs One: A heat pump load calculation estimates how much heat your home loses at the coldest design temperature, room by room, so the system can be sized to match. Quotes based only on floor area or the old furnace's size are guesses, and guesses lead to comfort and efficiency problems.
  • Heat pump water heaters: how they work and where they fit: A heat pump water heater moves heat from the surrounding air into the tank, so it uses less electricity than a conventional electric tank for the same hot water. It works best in a space with enough air volume and mild temperatures, and it also cools and dehumidifies that room.
  • Heating a basement or home addition with a heat pump: A basement or addition can be heated with a ductless heat pump, with a branch from the existing duct system, or with a separate small unit. A load calculation for the new space decides which option works, because adding rooms to a system sized for the old house often leaves it short.
  • How a heat pump gets installed, step by step: A heat pump installation, whether air-source or ductless, usually runs through a site assessment, a heat-loss calculation, permits, placement of the outdoor and indoor units, refrigerant and electrical connections, then testing and handover. A straightforward replacement can take a day or two, and homes needing duct or panel work take longer.
  • How air-source heat pumps cope with Canadian winters: An air source heat pump heats a home by extracting heat from outdoor air, even when the air is below freezing, and moving it indoors with a refrigerant cycle. Its capacity and efficiency fall as temperatures drop, so cold climate models and proper sizing matter in Canada.
  • How cold-climate heat pumps cope with a Canadian winter: A cold climate heat pump is an air-source heat pump built to keep delivering useful heat well below freezing, with many models rated to run at around -25 C or colder. Output and efficiency both fall as the air gets colder, so the rating on the nameplate matters less than the performance figures at your design temperature.
  • How long does a heat pump last, and how to extend it: An air-source heat pump typically lasts about 15 years, and many run for longer or shorter depending on installation quality, climate and maintenance. Regular servicing, clean coils and a correctly sized unit are the habits that most often add years.
  • How much electricity does a heat pump use?: A heat pump uses electricity to move heat rather than make it, so its power consumption is a fraction of the energy it delivers. The kWh it draws over a winter depend on the heat the house loses, the outdoor temperatures and the efficiency of the unit.
  • How to size a heat pump for a cold winter: Heat pump sizing in a cold climate starts with a room-by-room heat-loss calculation at your region's design temperature, then matches that load against the unit's rated capacity at the same temperature. Square-footage rules of thumb often lead to oversized equipment that cycles on and off and wastes money.
  • HSPF rating: what the number tells you: HSPF, or heating seasonal performance factor, measures how much heat a heat pump delivers over a heating season for each unit of electricity it uses, in BTU per watt hour. A higher HSPF means lower electricity use for the same heat, but the number comes from a standard test and does not guarantee results in a very cold climate.
  • Installing a heat pump in a commercial building: A commercial heat pump installation replaces or supplements a gas boiler or rooftop heating unit with equipment that moves heat instead of burning fuel. It works through a sequence of load calculation, system selection, electrical and structural checks, installation by qualified trades and commissioning, and Canadian winters make the cold-weather design the critical step.
  • Is a 4 ton heat pump right for a large home?: A 4 ton heat pump has a nominal capacity of 48,000 BTU/h, about 14 kW, and fits large homes or houses with high heat loss. It needs strong ducts and electrical service, and in many cases improving the building or splitting the load across two systems works better than one big unit.
  • Is your heat pump too loud? Sources and quiet fixes: A modern heat pump makes a steady hum from the outdoor fan and compressor, and most people stop noticing it within days. Banging, grinding or a sudden change in the sound is different and deserves a service call.
  • Is Your Heat Pump Worth Repairing or Time to Replace?: Repair a heat pump when it is within its expected life, the fault is a bounded part such as a fan motor or sensor and warranty or good records support it; replace when the compressor fails, the system is old and costly repairs repeat, or the refrigerant is being phased out. The repair quote itself tells you a lot.
  • Mini split or ducted heat pump: which fits your house?: A ductless mini split heat pump heats and cools rooms with wall or ceiling units linked to an outdoor unit by small refrigerant lines, while a central ducted system sends air through ductwork from one air handler. Mini splits suit homes without good ducts, and ducted systems suit homes that already have them.
  • Open-loop ground water heat pumps: how they work: A ground water heat pump pulls water from a well, passes it through a heat exchanger and returns it to the ground or a surface outlet. It can be efficient and cheaper to install than a loop field, but it needs a good water supply, suitable water quality and permission under provincial water rules.
  • Pairing a heat pump with a furnace: how dual fuel works: A hybrid or dual-fuel heat pump system combines an air-source heat pump with a gas furnace and uses whichever is cheaper or more capable at the moment. It makes most sense in cold climates where electricity costs much more than gas, or where the heat pump alone would struggle on the coldest days.
  • Reading a cold climate heat pump rating: A cold climate heat pump rating tells you a model is built and tested to keep delivering useful heat at low outdoor temperatures, but the term has no single national definition. The reliable evidence is the manufacturer’s performance data: capacity and efficiency at several outdoor temperatures, including well below freezing.
  • Reading a heat pump quote line by line: A good heat pump quote starts from a heat loss calculation for your house and then names the outdoor unit, the indoor unit, the ducting or head changes, the electrical work and the commissioning steps. If any of those is missing, the price is covering something less than a full installation.
  • Reading heat pump SEER2 and HSPF2 ratings: SEER2 rates a heat pump's cooling efficiency over a whole season, and HSPF2 rates its heating efficiency over a heating season. Higher numbers mean less electricity for the same comfort, but both are lab-based averages, so they work best as a way to compare models, not to predict your bill.
  • Replacing a Failing Furnace: Heat Pump or New Furnace?: If your furnace is failing, the choice between a new gas furnace and a heat pump depends mainly on your electricity-to-gas price ratio, the state of your ducts and panel, and how cold your winters get. A short list of checks will tell you which option suits your house.
  • Sizing a 2 ton heat pump for a small or tight home: A 2 ton heat pump has a nominal capacity of 24,000 BTU/h, about 7 kW, which suits small homes, condos, additions and well-insulated houses with low heat loss. It falls short in a larger or leaky house in a cold climate, where cold-weather output and backup heat decide whether it works.
  • Sizing a mini split and choosing how many zones: To size a mini split heat pump, calculate the heat loss of each room or zone at your coldest design temperature, then choose indoor units and an outdoor unit that deliver that heat in winter. The number of zones follows from how the house is laid out and where you want separate temperature control.
  • Solar panels and a heat pump: do they work together?: Yes. A heat pump runs on electricity, so rooftop solar can generate part or all of the energy it draws over a year. The pairing works as an annual balance on the grid, not as direct daytime power, because heating demand peaks in winter and solar output peaks in summer.
  • Steam, ice and sound: normal heat pump behaviour: A heat pump defrost cycle is a short, automatic period when the unit melts frost off its outdoor coil, and it is normal in cold, damp weather. Some steam, a change in sound and a brief pause in warm air from the indoor unit are all expected.
  • Using your existing ducts with a central heat pump: A ducted heat pump can often reuse the ductwork from a forced-air furnace, provided the ducts are the right size, reasonably airtight and insulated where they pass through cold spaces. Heat pumps move more air at lower temperatures than a furnace, so a duct check before installation is worth doing.
  • What a ductless heat pump is and who it suits: A ductless heat pump is an air-source heat pump that delivers heat and cooling through one or more indoor units mounted in the rooms, connected to an outdoor unit by thin refrigerant lines instead of ducts. It suits homes without ductwork, additions and spaces that need their own temperature control.
  • What a heat pump installation typically costs: A heat pump in Canada typically costs from a few thousand dollars for a single ductless head to a low-to-mid five-figure sum for a whole-home ducted system, and more for ground source. Prices vary by region and year, so written quotes from several installers are the only reliable answer.
  • What a heat pump really costs over its lifetime: The lifetime cost of a heat pump is the installed price plus electricity, servicing and repairs over its life, minus rebates and the cost of the equipment it replaces. For many homes the running costs decide whether a higher upfront heat pump cost pays back, and the answer depends on local energy prices.
  • What a heat pump service visit should cover: Most heat pumps benefit from a professional service about once a year, ideally before the heating season, plus regular filter checks by you. A proper visit has a checklist you can read before you pay, which is the best way to judge a service quote.
  • What can a 3 ton heat pump heat?: A 3 ton heat pump has a nominal capacity of 36,000 BTU/h, about 10.5 kW. How much house it can heat depends on the home’s heat loss and on how much output the unit keeps in cold weather, not on floor area alone, so a heat-loss calculation gives the real answer.
  • What goes into a heat pump installation price?: Heat pump installation cost is the equipment plus the labour and site work needed to fit it to your house: electrical, ductwork or wall units, refrigerant lines, permits and commissioning. The mix of these items, not the brand badge, usually explains why two quotes for the same house can differ widely.
  • What is a heat pump and how does it heat a home?: A heat pump is an electric system that moves heat from one place to another, taking it from outdoor air or the ground in winter and delivering it indoors. Because it relocates heat rather than making it by burning fuel, it can deliver more heat than the electricity it uses.
  • What is a heat pump balance point? A simple guide: The heat pump balance point is the outdoor temperature at which the heat pump's output exactly matches the heat the house is losing. Above it the pump keeps up alone, and below it the house needs backup heat or the indoor temperature slowly drifts down.
  • What to check on a heat pump, and when: A heat pump needs a clean filter, a clear outdoor coil with space around it, a free-running condensate drain and an annual check by a qualified technician. Most of the work you can do yourself takes a few minutes each season.
  • When to call a heat pump technician: Call a heat pump technician when the system will not heat or cool after basic checks, ice does not clear, there are loud or grinding noises, a burning smell, tripped breakers or water inside the house. Refrigerant and electrical work always needs a licensed professional.
  • Which refrigerant does a heat pump use? Types explained: Most heat pumps installed over the past two decades use R-410A, while newer units are moving to refrigerants such as R-32 and R-454B with a much lower global warming potential. The refrigerant is sealed inside the system, and only a certified technician should handle it.

Where to verify

Programmes, rules and prices change. Before acting on anything you read here, check it at the source:

  • Natural Resources Canada: federal energy-efficiency and clean-energy pages: programme status, EnerGuide labels, technical background.
  • Your provincial or territorial energy ministry: current rebates, rules and programme intake dates.
  • Your electricity or gas utility: rates, connection requirements and any utility incentive.
  • Environment and Climate Change Canada: climate normals and weather data for your area.
  • A licensed professional in your province: sizing, safety and installation for your particular building; these guides are general background only.

dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.