Furnaces, boilers, water heaters and heating costs
Most Canadian homes still heat with a furnace or boiler, and many questions start there: why it fails, what it costs to run, when replacement makes sense, and how it compares with a heat pump.
Last updated
About this topic
Most Canadian homes still heat with a furnace or boiler, and many questions start there: why it fails, what it costs to run, when replacement makes sense, and how it compares with a heat pump.
These pages explain the equipment, common faults, hot water systems and safety topics such as carbon monoxide. They are not repair instructions. Gas, electrical and oil work should be done by licensed professionals.
All 51 guides on this topic
- AC not cooling the house: what to check first: An air conditioner that runs but does not cool is most often short of airflow or heat transfer: a clogged filter, a dirty coil, a blocked outdoor unit or a wrong thermostat setting. Refrigerant problems and failed electrical parts come next, and those need a licensed technician.
- Annual Furnace Service: What You Should Get for the Visit: A proper annual furnace tune up inspects and cleans the burners, checks the heat exchanger, tests safety controls and carbon monoxide levels, and changes or checks the filter. Ask for a written checklist so you can see what was actually done.
- Annual heating maintenance: what to do and when: Heating maintenance is a short routine: a few homeowner checks each season, a professional inspection once a year, and a quick look for anything unusual in between. Done before the first cold weather, it lowers the chance of a winter breakdown and helps the system run closer to its rated efficiency.
- Are high efficiency gas water heaters worth buying?: A high efficiency gas water heater captures more of the fuel's heat than a standard tank, through a condensing heat exchanger, sealed combustion or on-demand firing. It typically costs more to buy and install, so the payback depends on how much hot water the household uses and what gas costs locally.
- Choosing a home water heating system in Canada: A home water heating system is the equipment that warms water for showers, laundry and dishes. The main choices in Canada are a storage tank, a tankless unit, a heat pump water heater, a solar preheat setup and a tank fed by the home's boiler, and the right one depends on fuel, space and hot water use.
- Choosing a new furnace for your home: A new furnace should be chosen in this order: fuel type first, then the capacity your house actually needs, then the efficiency rating. Size matters as much as the efficiency number, because an oversized furnace in a well-sealed home wastes energy whatever its label says.
- Choosing between two-stage and variable-speed heating: A two-stage furnace burns at a high or a low setting, while a variable-speed furnace uses a blower motor that changes speed in small steps and sometimes a burner that does the same. Both run longer at lower output than a single-stage furnace, which usually means steadier temperatures and quieter operation at a higher price.
- Cutting furnace costs without cutting corners: The cheapest furnace replacement is usually a basic, correctly sized unit installed to code, not the lowest figure on a page. Some savings are real (fewer features, off-season timing), while others (no permit, reused venting, oversizing) move the cost into later years.
- Do smart thermostats really cut the heating bill?: A smart thermostat can reduce heating use by lowering the temperature when nobody is home or asleep, and the savings are usually modest, in the range of single-digit to low double-digit percentages. The device only pays when it changes your behaviour or fixes a poor schedule.
- Furnace replacement: what, when and how: Furnace replacement makes sense when the unit is old, repair bills keep coming back, or a failure such as a cracked heat exchanger makes it unsafe to run. Planning the swap before a cold snap gives you time to compare efficiency, fuel type and quotes instead of buying in a hurry.
- Gas or electricity for heat: how to compare: Natural gas is often cheaper per unit of energy than electricity, but a heat pump delivers two to three times more heat than the electricity it uses, which can reverse the result. The emissions picture depends on how your province generates its power.
- Heat exchangers in the home: what they do: A heat exchanger is a device that passes heat from one fluid to another, such as combustion gases to household air, without letting the two mix. Furnaces, boilers, heat recovery ventilators and solar heating systems all rely on one, and a cracked one in a furnace is a safety problem.
- Heating Emergency in Winter: What to Do First: If you smell gas or a carbon monoxide alarm sounds, leave the building and call the gas utility or emergency number from outside. For an ordinary no-heat problem, check the thermostat, power and filter, then call a licensed technician and protect your pipes.
- Heating your home with a wood stove: A wood stove can heat a small, open, well-insulated home, or the main living area of a larger one. Heating a whole house with it depends on the floor plan, the insulation and how much work you will put into fuel and fire tending, and a certified stove with a proper installation matters more than its size.
- Hot water or hot air: choosing a main heat source: A boiler heats water and sends it through pipes to radiators or floor loops, while a furnace heats air and blows it through ducts. Neither is better everywhere; the right choice depends on the house layout, how you want it to feel and whether you plan to add cooling or ventilation.
- Hot water recirculation: pumps, loops and controls: Domestic hot water recirculation uses a small pump to keep hot water moving through the pipes so it arrives at the tap quickly. It saves the water you would run down the drain while waiting, but a loop that stays hot all day also loses heat, so the controls decide whether it pays off.
- How a hot water boiler heats your house: A hot water boiler heats water in a closed loop and pumps it to radiators, baseboards or in-floor tubing, where the heat leaves the water and warms the rooms. It is a space heating appliance, and it should not be confused with a domestic water heater, although some systems also heat taps.
- How a whole-home HVAC installation is done: HVAC installation covers heating, ventilation and air conditioning equipment installed as one system. A sound job follows a sequence: a load calculation and design, permits, equipment and duct work, commissioning tests, and a handover, and skipping any stage tends to show up later as noise, uneven rooms or high bills.
- How efficient is a condensing boiler in cold weather?: A condensing boiler recovers heat from the water vapour in its exhaust, so it can reach an AFUE of roughly 90 percent or more. It only condenses, and only earns that rating, when the water returning from the radiators or floors is cool enough, which is why system design matters as much as the label.
- How furnace installation works, step by step: The furnace installation process has four steps: a home visit and written quote, a permit, the installation itself, and a safety test with a walk-through. Most home jobs take a day, and the quote you accept sets what is included, so that is where the careful comparing belongs.
- How in-floor heating works and when it fits: Radiant floor heating warms the surface of the floor, which then heats people and objects directly and the room air gently. Hydronic systems circulate warm water through tubing, electric systems use heating cables or mats, and the hydronic type is the one that pairs well with solar and heat pumps.
- How long does a furnace last in a cold climate?: A gas furnace typically lasts roughly fifteen to twenty years, and some run longer with good care. In Canada the long heating season, installation quality and yearly maintenance matter as much as the calendar, so age is a starting point for the replacement decision, not the whole answer.
- How long furnaces, boilers and heat pumps last: A gas furnace typically lasts about 15 to 20 years, a boiler often 20 years or more, and an air-source heat pump roughly 12 to 15 years. Maintenance, climate and installation quality can shift each of those ranges noticeably.
- How often to change your furnace filter: Most one-inch furnace filters need changing every one to three months, and thicker media filters every six to twelve months, but the manufacturer's label and your household decide. Check the filter monthly in winter, and change it whenever it looks grey and clogged.
- How to size a furnace for your house: A furnace size calculator gives a rough BTU figure from floor area and climate, which is useful for a first idea. The right size comes from a heat loss calculation that counts walls, windows, insulation and air leakage, because a furnace should match what your house loses on a design cold day.
- How to size a water heater tank for your household: The right hot water tank size depends on how much hot water your household uses in its busiest hour, not on the number of people alone. The first-hour rating on the unit's label, which combines tank volume and recovery speed, is the number to compare against that peak.
- Indirect water heaters explained for boiler homes: An indirect water heater is an insulated storage tank with a heat exchanger coil inside, and the home's boiler supplies the heat instead of a burner or element on the tank. It suits houses that already have a hydronic boiler, and it gives fast recovery with low standby loss.
- Installing central air in a cold-climate home: An air conditioner installation sets an outdoor unit, an indoor coil or wall unit, refrigerant lines, a condensate drain and electrical supply, then tests the circuit. In a cold-climate home, the extra questions are duct capacity, drain freezing and where snow and ice will fall on the outdoor unit.
- Installing heating and cooling together at home: Heating and cooling installation can be one project when the two systems share ducts, controls and a design. A heat pump does both jobs with one outdoor unit, while a furnace plus central air conditioner is two machines that happen to share the same air handler and ducts.
- Is your furnace a carbon monoxide risk?: Carbon monoxide (CO) is a colourless, odourless gas produced when fuel burns without enough air, and a faulty gas, oil or propane furnace can release it into the house. Working CO alarms, a yearly inspection by a licensed technician and clear vents are the core of furnace safety.
- Practical ways to cut winter heating costs: The fastest ways to lower a winter heating bill are to stop air leaks, add attic insulation where it is thin, keep the furnace or boiler serviced, and set back the thermostat when nobody is home. Each one is cheap compared with replacing the heating system.
- Replacing a furnace: where the money goes: Furnace replacement cost in Canada typically runs from a few thousand dollars for a straightforward swap to noticeably more when ductwork, venting or electrical work comes along. The efficiency tier, the size of the unit and the condition of the house decide where a job lands, and a written quote is the only reliable number.
- Replacing an AC and furnace together or separately: A new AC and furnace bought together usually cost more upfront than one unit, but less than two separate projects because labour, permits, duct work and electrical changes are shared and the parts are matched. Which route is cheaper over time depends on the age and condition of each unit.
- Replacing HVAC equipment in a commercial building: Commercial HVAC replacement makes sense when equipment is near the end of its service life, repair calls are frequent, energy use keeps rising or parts and refrigerants are becoming hard to source. The best results come from planning the replacement before a breakdown forces it, and from sizing the new system to the building as it is now.
- Replacing your furnace and air conditioner together: HVAC replacement is worth doing when the system is near the end of its life, repairs keep returning, or comfort and energy bills have slipped. Replacing the furnace and air conditioner together usually makes sense when both are old, because the parts can be matched and the work is done once.
- Replacing, sealing or adding air ducts at home: HVAC ductwork installation is worth considering when ducts are leaking, undersized, crushed, damp or missing. Sealing and insulating existing ducts is often enough, while full replacement makes sense when the duct system is damaged or cannot carry the airflow your equipment needs.
- Should You Repair or Replace Your Furnace?: Repair a furnace when it is relatively young, the fault is a single minor part and the heat exchanger is sound; replace it when it is old, repairs are repeating or any safety issue is involved. A written diagnosis and a few rules of thumb make the call much easier.
- Smart or programmable thermostat: how to choose: A programmable thermostat follows a schedule you set once, while a smart thermostat connects to Wi-Fi, can be changed from a phone and may adjust itself to your routine. Which one fits depends less on the savings claims than on your household routine and whether your heating system and wiring are compatible.
- Steam radiator heating explained for Canadian homes: A steam radiator system heats water in a boiler until it turns to steam, sends that steam up pipes to radiators, and lets it condense back to water that returns to the boiler. It is found mostly in older Canadian houses and apartment buildings, and it can be kept, tuned or replaced with a hot-water or heat pump system.
- Tank or tankless: choosing a water heater: A tank water heater keeps a reservoir hot all day, while a tankless unit heats water only when a tap opens. Tankless avoids standby heat loss and never runs out in a single draw, but it costs more to install and has a flow limit that cold Canadian groundwater makes more noticeable.
- What a boiler heater does and when to upgrade it: A boiler heater warms a home by sending hot water through radiators, baseboard units or floor tubing instead of blowing warm air through ducts. It gives even, quiet heat, and the cheapest upgrades are often controls, insulation and a lower water temperature rather than a new boiler.
- What AFUE means on a furnace efficiency label: AFUE, annual fuel utilization efficiency, is the percentage of a furnace's fuel energy that becomes heat for the house over a typical heating season. A rating of 95 percent means roughly 95 units of heat for every 100 units of fuel, with the rest lost up the flue.
- What drives the price of installing central air: The cost of installing central air depends mostly on whether your house already has usable ducts, how large and efficient the unit is, and how much electrical and labour work the job needs. Prices vary by region and year, so written quotes decide, not national averages.
- What Goes Into a Gas Furnace Installation Quote: A gas furnace installation cost is the unit plus everything needed to make it run safely in your house: venting, gas piping, ductwork changes, electrical, permits and removal of the old furnace. Prices vary by region and year, so only itemized written quotes can tell you what your job will cost.
- What goes into a new HVAC system price: HVAC installation cost is set by the type of system, its capacity and efficiency, the condition of your ducts, the electrical and venting work, and local labour. Because those inputs differ house by house and year by year, a written quote based on a site visit is the only reliable number.
- What to do when your furnace runs but will not heat: When a furnace is not heating, the cause is often simple: thermostat settings, a tripped breaker, a dirty filter, a closed gas valve or a blocked vent or drain. Check those in order, using only safe steps, and call a licensed technician if the furnace still will not start or you smell gas.
- When and how to replace a hot water tank: A hot water tank should be replaced when it leaks, rusts through, no longer keeps up or is well past its expected life. Replacing it before it fails lets you choose the fuel, size and type instead of taking whatever is in stock during a flood.
- Whole-house humidifiers for dry winter air: A furnace humidifier adds moisture to the warm air the furnace sends through the ducts, so the whole house gets it. Bypass, fan-powered and steam models do this in different ways, and the right humidity level in a Canadian winter is a modest one, set low enough to avoid condensation on windows.
- Why lower supply temperatures make heating cheaper: Low temperature hydronic heating moves heat through a house using water at roughly 30 to 50 degrees Celsius instead of the 70 degrees or more that older radiator systems used. That cooler water lets heat pumps, solar collectors and condensing boilers work at higher efficiency.
- Why your water heater is not heating, and what to do: A water heater that is not heating usually has a tripped breaker or reset button, a failed element or thermostat on an electric tank, or a pilot, ignition or gas supply problem on a gas one. A few checks are safe for a homeowner, but gas, wiring and a leaking tank belong to licensed trades.
- Zoned heating and cooling for uneven homes: An HVAC zoning system divides a house into areas that each have their own thermostat and a motorized damper in the ductwork, so one furnace and air conditioner can heat or cool each zone separately. It suits multi-storey houses and rooms that never match the rest, and its cost depends mainly on the number of zones and the duct changes needed.
Where to verify
Programmes, rules and prices change. Before acting on anything you read here, check it at the source:
- Product certification marks: look for a recognised Canadian certification mark (for example CSA) on electrical and gas equipment.
- Your provincial or territorial energy ministry: current rebates, rules and programme intake dates.
- Your gas or fuel safety authority: licensing for gas and oil work, and carbon monoxide safety requirements.
- A licensed professional in your province: sizing, safety and installation for your particular building; these guides are general background only.
dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.