Home energy basics: grid, carbon and storage
Some questions do not fit a single technology: what a kilowatt-hour is, how electrification changes a household load, or how a microgrid works. This hub holds those background explainers.
Last updated
About this topic
Some questions do not fit a single technology: what a kilowatt-hour is, how electrification changes a household load, or how a microgrid works. This hub holds those background explainers.
Use them as a glossary of ideas that appear throughout the solar, heat pump and storage guides.
All 11 guides on this topic
- Electrifying home heating in Canada, step by step: Electrification of home heating means replacing a gas, oil or propane furnace or boiler with electric equipment, most often a heat pump. The switch can cut on-site fuel use and emissions, but the result depends on the house, the electricity supply, the rates and whether the electrical panel can carry the new load.
- Fall prep to lower winter energy use: A good fall checklist covers air leaks, heating equipment servicing, insulation, controls and a few safety items. Doing it before the first hard freeze costs little and prevents the problems that show up in January.
- Home energy monitoring systems and what they measure: A home energy monitoring system measures electricity, and sometimes gas or heat, as the house uses it, then shows the data on a screen or app. It will not cut a bill by itself, but it shows which loads run when, which makes waste and heating problems easier to find and fix.
- How carbon pricing touches a heating bill: Carbon pricing raises the cost of fuels that release carbon dioxide when burned, so it matters most for homes heated with natural gas, propane or oil. Whether a charge appears on your bill depends on the rules in force in your province and year, which have changed in recent years, so check current terms with your fuel supplier.
- Kilowatt hours: the unit behind your power bill: A kilowatt hour (kWh) is the amount of energy used by a 1,000-watt device running for one hour. Electricity bills, solar production estimates and battery sizes are all given in kWh, while the kilowatt (kW) measures the rate of power at a moment in time.
- Phantom energy use: what standby loads cost a home: Phantom power loads, also called standby power or vampire power, are the small amounts of electricity that devices draw while switched off or idle. Each one is tiny, but dozens of them run around the clock, so they add up to a steady line on the electric bill.
- RECs explained: who owns the green claim on your solar: A renewable energy certificate, or REC, is a tradable record that one megawatt-hour of electricity came from a renewable source. For a homeowner with solar panels, the practical question is who holds the certificate: whoever owns it can claim the green power, and whoever sells it gives that claim up.
- Virtual power plants explained for Canadian homes: A virtual power plant, or VPP, is software that coordinates many small energy devices, such as home batteries, solar systems, smart thermostats and water heaters, so that together they act like one power plant. It can add power or cut demand when the grid is tight, without building new generating stations.
- What is a microgrid, and when does it make sense?: A microgrid is a small, locally controlled electricity system that combines generation, storage and loads, and can usually operate connected to the main grid or on its own during an outage. It can serve a campus, a hospital, a neighbourhood or a remote community.
- Where Do Heating Emissions Come From at Home?: Heating a house and its water accounts for well over half of household energy use in Canada, so it is a major source of residential emissions. How large depends on the fuel, the efficiency of the equipment and the building, and, for electric heat, the province's grid.
- Which Renewable Heating Options Suit Canadian Homes?: The main renewable heating options in Canada are air-source and ground-source heat pumps, solar thermal, district energy and biomass. In cold regions, heat pumps are the most widely applicable, while solar and district systems need the right site.
Where to verify
Programmes, rules and prices change. Before acting on anything you read here, check it at the source:
- Natural Resources Canada: federal energy-efficiency and clean-energy pages: programme status, EnerGuide labels, technical background.
- Your electricity or gas utility: rates, connection requirements and any utility incentive.
- Environment and Climate Change Canada: climate normals and weather data for your area.
dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.