What a solar electrical inspection covers
A solar electrical inspection is a check, done by the authority that has jurisdiction, that the panels, wiring, inverter and shutdown devices of a system meet the electrical code before it is switched on. In most of Canada it follows an electrical permit and comes before the utility approves the connection.
Who carries out a solar electrical inspection?
Electrical safety in Canada is regulated by the provinces and territories, so the inspector depends on where you live. In some places it is a provincial safety body, in others a municipal inspector or a designated agency. The inspector is not your installer and has no stake in the sale. Their job is to compare the finished work with the Canadian Electrical Code and any local amendments.
The inspection is separate from the building permit that some municipalities ask for when panels go on a roof. Our guide to solar installation permits and inspections explains how the two fit together, and solar panel permits covers the paperwork side.
What does the inspector actually look at?
Expect a mix of visual checks and a few simple tests. The details differ between inspectors, but the usual list looks like this:
- Wiring type, size and protection on the DC side between the panels and the inverter.
- Grounding and bonding of the array, the racking and the inverter.
- Conductors, breakers and disconnects on the AC side, including the connection to the main panel.
- Rapid shutdown devices and the labels that tell a firefighter or an electrician how to isolate the system.
- Equipment markings, so the inspector can see that the parts are certified for use in Canada.
- Conduit, cable support and weather sealing where wiring passes through the roof or wall.
The inspector may also look at the roof from the ground or the attic. They are not judging how much power the system will make. A system can pass with poor production and fail with excellent production.
How does the inspection fit into the install timeline?
The usual order is design, permit, installation, inspection, then utility approval and permission to operate. Panels may sit on the roof for days or weeks before the inspection, but the system should stay switched off until it is cleared. Switching on early can void the connection agreement. The solar interconnection process shows what the utility needs next, and the solar installation timeline puts typical waiting periods in context.
Inspector availability is often the slowest step. A booking can take a few days in one region and a few weeks in another during the busy summer season, so ask your installer how long it has been taking locally.
What causes a solar system to fail inspection?
Most failures are small and fixable. Missing or unclear labels, a loose bonding connection, wire sized for the wrong current, or a rapid shutdown device that is not installed as the code expects are common examples. An inspector may also stop on a roof penetration that is not properly sealed. The installer corrects the item and asks for a re-inspection, which can add delay and, depending on the provider, a fee.
You can reduce the risk by asking the installer who pulls the permit, who books the inspection, and whether a re-inspection is included in the quote. The solar installer checklist has other questions worth asking before you sign.
Is a periodic inspection needed after the system is running?
Canadian rules generally ask for one inspection at installation, not a yearly one. Even so, a visual check now and then is sensible. Look for animal nests, loose conduit, scorched connectors or an inverter that keeps showing a fault. If something looks wrong, call a licensed electrician or the installer rather than climbing up yourself. Routine care is covered in solar panel maintenance in Canada, and warranty conditions in solar panel warranties explained may require records of professional servicing.
Keep the inspection certificate or permit sign-off with your system documents. A buyer, insurer or lender may ask for it later.
Quick answers
Do I need an electrical inspection for solar panels?
In most provinces and territories, yes. A solar installation is electrical work, and it normally needs a permit and an inspection by the authority in your area. Check with your provincial electrical safety body or municipality for the current rules.
Who pays for the solar electrical inspection?
The permit and inspection fee is often included in the installer's quote, but not always. Ask for it to be listed as a separate line so you know what is covered, including any re-inspection.
Can I turn on my solar system before the inspection?
No. The system should stay off until the inspection is passed and the utility has approved the connection. Running it early can breach your interconnection agreement.
How long does a solar electrical inspection take?
The visit itself is usually short, often under an hour or two for a home system. The wait to book it varies by region and season, so ask your installer for the local pattern.