String inverter or microinverters: how to choose
A string inverter is one central unit that converts the direct current from a whole row of solar panels into alternating current, while microinverters are small units mounted behind each panel that convert power there. String inverters usually cost less and suit simple, unshaded roofs. Microinverters handle shade and mixed roof planes better and give per-panel monitoring, usually at a higher price per watt.
Last updated
How do string inverters and microinverters work?
Solar panels produce direct current (DC), and your home runs on alternating current (AC), so every solar system needs an inverter to turn DC into AC. The two designs differ in where the conversion happens.
In a string system, panels are wired in series into one or more strings. All the direct current travels down the wire to one central inverter, usually mounted on a wall in a garage, basement or outside, and that solar inverter converts it to AC power. Strings are matched to the inverter's voltage window, so the layout needs careful design.
In a microinverter system, each panel, or a pair of panels, has a small inverter of its own attached to the racking behind it. The conversion happens on the roof, and alternating current runs along the roof wiring to the electrical panel. Every panel works as an independent unit and finds the best operating point for itself. The wider guide on solar inverter types explained shows how these designs sit among the options, and the grid-tie inverter guide covers the basics of connecting to the utility.
A third layout sits between the two. An optimizer is a small DC unit at each panel, and the conditioned DC still goes to a central inverter, which keeps the conversion in one place and gives some of the benefits of microinverters.
Which handles shading and complex roofs better?
In a plain string, the panels share one current, so a shaded panel can pull down the output of the others in the string. Modern string inverters and bypass diodes reduce that effect, and a clean south-facing roof with no trees or chimneys may never see the problem. But a shadow from a tree, a vent pipe or a neighbour's roof is common in cities, and winter sun is low, so shadows are long.
Microinverters and their kin manage each panel separately, so a darkened panel loses only the output it would have made. That makes them popular on roofs where several planes and angles meet, because panels facing opposite directions can join one system without being forced into the same string. The guide to shading and optimizers goes into more detail on how much energy shade can cost.
A rough, stated example: suppose a roof has 10 panels in one string and one panel is shaded for part of each afternoon. With a string, those afternoon losses can spread across the whole string, while with per-panel electronics only the shaded panel loses power. The size of the loss depends on how long and how deeply the shadow falls, which is why an installer's site analysis matters more than a general rule.
Does the inverter type change efficiency and energy production?
Every inverter loses a little solar energy in the conversion, whether it handles DC electricity at the panel or at a central box, and modern units usually convert at an efficiency in the high nineties, so the gap between designs on that single number is small. What changes the annual energy generation is how the system behaves in real conditions: shading, panels facing different ways, soiling and snow on part of the array, and the performance of the unit when output is low in winter. For an unshaded home roof, a string design and a per-panel design often produce similar energy. For a roof with mixed conditions, the per-panel design can recover some output that a string loses.
Installation also differs. A string inverter means fewer boxes to mount and one location to wire, so installation is quick, while microinverters mean more connections on the roof. A good installer explains the system design and its trade-offs in plain terms, and a licensed electrician must complete the connection to your home and the utility.
How do monitoring and maintenance compare?
Monitoring shows what each part of the system produces. Most string inverters report the output of the whole system, or of each string, through an app that you use on a phone, so you see total production but not which panel is underperforming. Per-panel devices report for each panel, which makes it easier to spot a failed unit, a panel in shadow or a dirty one. The solar system monitoring guide explains which numbers are worth watching.
Maintenance differs in location. A string inverter sits on a wall, within easy reach, and one failure shuts down the whole array until it is repaired. Microinverters sit behind the array, so a replacement needs access and careful timing in winter, but one failure only affects one panel. Both need a service visit when the monitoring app shows a fault.
How do warranty, lifespan and cost compare?
String inverters typically carry a warranty of around ten to fifteen years, and many owners replace the inverter once during the life of the panels. Per-panel devices often come with longer coverage, in some cases a 25 year warranty, which matches the panels. Terms vary between products, so compare the written warranty, what it covers, and whether labour for a roof replacement is included. The solar panel warranty explained guide shows how to read the fine print.
On cost, a string inverter is usually the cheapest option per watt, because one unit serves the whole array. Hardware at each panel normally raises the price. The gap depends on system size, the products, labour and the year, so a written quote is the only reliable guide, and the solar panel cost in Canada piece lists the main cost drivers. Remember to compare long-term cost too: a string design may need an inverter replacement later, while a per-panel design may need fewer replacements but costs more up front.
Which option fits batteries, cold weather and code rules?
Battery storage adds another question, since a battery needs DC or AC coupling and an inverter. A hybrid inverter combines the solar and battery functions in one box, and the hybrid inverter guide explains it. For the batteries themselves, see solar battery storage in Canada.
Canadian winters affect equipment choice. Check that any outdoor inverter or unit on the array is rated for the low temperatures in your area, and that a wall-mounted string inverter is placed where snow cannot bury it and where it stays within its operating range. Electrical codes also set rules for rooftop systems, including rapid shutdown for emergency crews, and per-panel equipment can help meet them. Ask the installer how the design complies, and confirm the interconnection steps with your local utility.
This site does not sell or install anything. When you compare designs, ask a licensed installer these questions:
- how much shade falls on each panel across the day and the year
- which design is proposed, and why it suits your roof planes
- how production is monitored and who sees the alerts
- the warranty terms, the expected replacement cost and who handles the roof work
- the installed cost for each watt, with a clear breakdown of the inverter equipment
Quick answers
Are microinverters better than string inverters?
Not always. Microinverters do better with partial shade, several roof directions and per-panel monitoring, while a string inverter is cheaper and works well on a simple, unshaded roof.
Do microinverters cost more than string inverters?
Usually, per watt, because there is hardware at every panel. The gap varies with the products and the system size, so compare written quotes.
How long do string inverters and microinverters last?
String inverters often last around ten to fifteen years and may be replaced once during the life of the panels. Microinverters often come with longer warranties, in some cases about 25 years, but terms vary.
Are power optimizers the same as microinverters?
No. An optimizer conditions DC power at each panel and still feeds a central string inverter, while a microinverter converts to AC at the panel.
Where to verify
Programmes, rules and prices change. Before acting on anything you read here, check it at the source:
- Natural Resources Canada: federal energy-efficiency and clean-energy pages: programme status, EnerGuide labels, technical background.
- Your provincial electrical or building safety authority: permit, inspection and code requirements, including the edition of the Canadian Electrical Code in force.
- Product certification marks: look for a recognised Canadian certification mark (for example CSA) on electrical and gas equipment.
- Your electricity or gas utility: rates, connection requirements and any utility incentive.
- A licensed professional in your province: sizing, safety and installation for your particular building; these guides are general background only.
dlsc.ca is an independent information site. It sells and installs nothing and gives no personal advice.
Part of the topic: Solar panels. See all guides on this topic.